GOT SIMPLE Series
Quick Inquiry
GOT SIMPLE Series
GS21-N Model
The GOT SIMPLE Series upgrade brings the most demanded new features
– Support RS-485 connection
– Support outline font
– Operation log function
– VNC server function
– User memory capacity (9 MB → 15 MB)
General specifications
| Item | Specifications | |||||
|---|---|---|---|---|---|---|
| Operating ambient temperature *1 | 0 to 50 ℃ | |||||
| Storage ambient temperature | -20 to 60 ℃ | |||||
| Operating/Storage ambient humidity | 10 to 90% RH, non-condensing *2 (The wet bulb temperature is 39℃). | |||||
| Vibration resistance | Conforms to IEC 61131-2 | Frequency | Acceleration | Half-amplitude | Sweep Count | |
| Under intermittent vibration | 5 to 8.4 Hz | – | 3.5 mm | 10 times each in X, Y and Z directions | ||
| 8.4 to 150 Hz | 9.8 m/s² | – | ||||
| Under continuous vibration | 5 to 8.4 Hz | – | 1.75 mm | – | ||
| 8.4 to 150 Hz | 4.9 m/s² | – | ||||
| Shock resistance | Conforms to IEC 61131-2 (147m/s², 3 times each in the X, Y, and Z directions) | |||||
| Operating atmosphere | Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electro conductive dust particles. Must be no direct sunlight. (Same as for saving) | |||||
| Operating altitude *3 | 2000m (6562ft) max. | |||||
| Installation location | Inside control panel | |||||
| Overvoltage category *4 | Ⅱ or less | |||||
| Pollution degree *5 | 2 or less | |||||
| Cooling method | Self-cooling | |||||
| Grounding | Grounding with a ground resistance of 100 Ω or less by using a ground cable that has a cross-sectional area of 0.14 to 1.5 mm2 (solid wire), 0.14 to 1.0 mm2 (stranded wire), or 0.25 to 0.5 mm2 (rod terminal with an insulation sleeve). If impossible, connect the ground cable to the control panel. | |||||
- *1 Includes the temperature inside the enclosure of the control panel to which the GOT is installed.
- *2 If the ambient temperature exceeds 40 °C, the absolute humidity must not exceed 90% RH at 40 °C.
- *3 Do not use or store the GOT under pressures higher than the atmospheric pressure of altitude 0 m (0 ft).
Failure to observe this instruction may cause a malfunction. When the air inside the control panel is purged by pressurization, the surface sheet may be lifted by high pressure. As a result, the touch panel may be difficult to press, and the sheet may be peeled off. - *4 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises.
Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the raged voltage of 300 V is 2500 V. - *5 This index indicates the degree to which conductive pollution is generated in the environment where the equipment is used.
In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation.